CALL US :1 (888)-4WAN-LAN

Positron G1001-M[G1000-M]

Positron G1001-M[G1000-M]

Quantity :

Positron to Ethernet Managed Demarcation Point

“Fiber to the Home” is far from the only and most efficient technology to deliver Gigabit Internet access to subscribers. Retrofitting an existing (brownfield) Multi- Dwelling Unit (MDU) with fiber is complex and expensive. The G1000 series of to Ethernet Managed Demarcation Point devices complement the Positron Aggregation Multiplexer (GAM) family to deliver near symmetrical Gigabit Internet access to subscribers in MDUs over the existing telephone or coaxial infrastructure at a fraction of the cost of alternatives.

About the G1000 Managed Demarcation Point

The Positron to Ethernet Bridge (G1000-M for twisted pair or G1000-C for coaxial) is a Managed Demarcation Point acting as a Virtual CPE (vCPE) that can be used to connect to a Residential Gateway (RG) that does not have native support for on its WAN port.

The G1000-M and G1000-C devices are used to control how a Residential Gateway (or User CPE) connects to the Access Network under the control of the Positron GAM. In this role, they make sure the information transmitted over the links is protected with strong AES-128 encryption. When used in Point-to-multipoint mode (coaxial wiring), the G1000-C operates under control of the GAM to isolate the traffic from each subscribers that share the same coax splitter.

G-1000 chart

• Wave-2 to Ethernet Bridge over Twisted Pair
• Multiple Input Multiple Output (MIMO) mode
• port (RJ14 port)
• Telephone port (via built-in POTS splitter)
• Two 10/100/1000BaseT RJ45 ports

LED Power, RJ45 ports link/active, link
Power Source 12 Vdc / 1A power adapter
Power Consumption Less than 3W
Certification CE mark, FCC Part 15 Class A
Operating Temperature 0°C to 40°C
Storage Temperature 25° to 80°C
Operating Humidity 5% to 95% relative, non-condensing
       Specification Standards Wave-2 Client, Based on GigaWire Alliance specification and fully compliant with the following ITU-T standards; G.9960 Amendment 2 - System Architecture and PHY layer, G.9961 Data Link Layer, G.9962 Management, G.9964 PSD
Ease of Deployment Support operation over telephone wiring (G1000-M) or coax cabling (G1000-C)
Point-to-Point and Point-to-Multipoint Support Supports Point-to-Point (twisted pair and coax) with G1000-M and Point-to-Multipoint operation (coax) for up to 16 G1000-C per port
Ease of Operation Automatic firmware and configuration management via Positron GAM
Encryption AES-128 encryption with individual keys for each end-node under the control of the Positron GAM acting as the Master Node
Modulation and Frequency Band Supports OFDM 200 MHz (Single Input Single Output - SISO) with suport for Neighbor Domain Interface Mitigation (NDIM) and Radio Band Notching function allows cohabitation with legacy analog cable TV channels over coax
Bandwidth Management Up to 1.7 Gbps with Dynamic Bandwidth Allocation to optimize throughput based on nature of traffic flows with TDD Multiplexing for prgrammable upstream / Downstream
Vectoring (Telephone Wiring) Support for VectorBoost™ cloud-based vectoring for Far-end Crosstalk (FEXT) mitigation and improved performance over telephone wiring
Mitigation of Near-end Crosstalk Near End Crosstalk (NEXT) mitigation and support for Neighbor Domain Interface Mitigation (NDIM)
PSD Programmable PSD mask for coexisitance with xDSL / Radio and Far End Crosstalk (FEXT) mitigation via cloud-based VectorBoost™ vectoring
Reliability and Resiliency State of the art LDPC Forward Error Correction (FEC)
Part Number Description
G1000-M (MIMO) to Gigabit Ethernet Bridge AC Wall Adapter included
Quick Find
Use keywords to find the product you are looking for.
Advanced Search