Power Input |
Terminal block, 12 48 VDC nominal
Includes extended temperature external AC to DC power adapter. Two screws fasten the plug to the enclosure to lessen the chance of yanking it loose. |
Optional Power Input |
Also offer a nominal 48V input (36 60 VDC range) |
Mounting |
DIN-rail mounting clip on unit. Optional shelf mounting with the clip removed. |
Enclosure |
Metal enclosure to be installed in a cabinet on a DIN-rail or on a shelf. |
Operating Temperature |
-40 to +70C |
Humidity |
85% condensing. Conformal coating option available if 100% humidity is requested. |
Vibration |
IEC 60068-2-6, 7.5mm, 5?8 Hz, 2g, 11 ms |
Shock |
IEC 60068-2-27, 15 g, 11 ms |
Electrical Protection |
Power Input spike and surge protection per MIL STD 1275 |
Optional |
Conformal coating for protection against condensation and frost. This is a viable option for the nonsealed version.
MIL STD 1275 protection |
Capacity |
Up to 8 simultaneous low- bandwidth voice or HD calls with SRTP or T.38 fax calls |
Voice Signaling |
SIPv2 / SIPv2 over TLS** (B2BUA capable, multi instance, simultaneous support of multiple registrars and direct IP dialing)
SIP call transfer, redirect
DTMF in-band & out-of-band
All tones programmable (dial, ringing, busy) |
Voice Processing |
G.722
G.711m/A-law
G.723.1 (6.4 kbps)
G.729, 729a, 729ab (8 kbps)
G.726 (16 ,24, 32, 40 Kbps)
G.168-2004 echo cancellation (128 ms)
Up to 4 simultaneous lowbandwidth voice or T.38 fax calls
Up to 4 HD calls with SRTP
Up to 200 SIP-to-SIP calls***
Up to 4 SIP transcoded calls*
Silence suppression and comfort noise
Adaptive and configurable dejitter buffer
Configurable RTP packet length |
Call Switching and Services |
Regular expression based call routing and number manipulation
Number blocking
Short-dialing
Digit collection, distribution and hunt groups
Transparent line extension
Fallback Routing: Soft fall back to alternative route(s) |
FXS Connectivity |
2-wire Loopstart on RJ-11/12
EuroPOTS (ETSI EG201188)
Programmable AC impedance, feeding, ring and onhook voltage
Caller-ID FSK and ITU V.23/Bell 202 generation
Long Reach FXS 10 km @ 3REN load
Secondary Surge Protection* |
FXO Connectivity |
2-wire Loopstart RJ11/12
Programmable impedance
Ring detection, tone detection
Caller ID detection (FXS, DTMF)
Disconnect supervision |
Connectivity |
Two 10/100/1000Base-T Ethernet ports
USB port
Auto-MDIX
DHCP Client
PPPoE Client (multi-session)
IP Multi-Netting, VLAN, Secondary IP
IPv4 and IPv6 - Dual Stack
ICMP
Dynamic and static NAT and NAPT
ACL, Stateful Firewall
DNS, DynDNS
DHCP Server
SNTP Client |
Quality of Service |
PacketSmart Network Assessment & Monitoring**
Voice priority, DownStreamQoS
Traffic Management, shaping policing
IEEE 802.1p, IEEE 802.1Q, 4096 VLANs (Tag insertion/deletion), TOS, DiffServ Labeling |
Management |
Web/HTTPS, CLI & SSH Telnet access
Patton Cloud Management
Fully Documented CLI
Telnet and HTTPs access
TR-069, TFTP, HTTP, HTTPS configuration & firmware up- and download
SNMPv3 agent
Separate config domain (LAN side config and WAN side config)
MIB II and private MIB
Built-in diagnostic tools
Secure Auto-Provisioning with built in root CA |
Power Consumption |
~7.2 watts |
Dimensions |
8-1/16 W x 6-3/16 D x 2-1/8 H in. (20.3 W x 15.8 D x 5.4 H cm) |
Weight |
1 lb 15 oz (890 g) |
Safety & Compliance |
EMC compliance: EN55022 and EN55024
Safety compliance: EN 60950
CE compliance
FCC Part 15 Class A
TBR21 (FXS)
RoHS
ITU-T K.21 protection (FXS ports)** |
|
* Specifications subject to change without notice. ** Internal power supplies available on special order basis. For more information, contact sales@patton.com |