Demand for IP/Ethernet-connected devices in the Audio Video space is growing rapidly. Power-over-Ethernet (PoE) in particular—has grown in popularity because it strikes the perfect blend of speed, cost, and ease of use.
Ethernet, however, presents a few drawbacks that may overshadow the benefits by creating escalating infrastructure costs and system downtime. The Ethernet standard specifies a distance limitation of 328 ft (100 m), which restricts location options for device installation. Standard Ethernet also requires Cat 5 cabling or better, which often leads to installing new cabling infrastructure—involving tearing into walls, ceilings, pavement, and worse.
The CopperLink 1151E kit from Patton enables Ethernet connectivity of your Dante enabled devices over previously installed copper infrastructure, such as existing speaker, alarm cables even CCTV coaxial cable.
Instantaneously install your 10/100BaseTX Dante enabled speakers, I/O converters and more—with no additional overhead cost. With the extended reach the CL1151E kit provides, you can install your IP Audio Video and teleconferencing equipment exactly where you want it!
- Dante Ethernet Extension—Extends 10/100Base-TX Ethernet over 3,300 feet (1005 meters) using 2-wire, 18-26-AWG twisted-pair, Cat 3, Cat 5e/6/7, or coaxial cable.
- ?Delivers PoE—?PowerPlus technology powers up both the remote CopperLink extender and the Dante PoE enabled device connected to it. No power is required at the remote location.
- Transparent LAN Bridging—?Will pass higher layer AES67/TSN/AVB protocols and all audio/video compression schemes.
- ?Plug and Play—?Modems need no configuration to operate, Ethernet ports are auto-sensing 10/100, full or half-duplex.
- Overvoltage Protection—Overvoltage protection on Line and Ethernet ports prevents damage from ESD (electrostatic discharge), CDE (cable discharge events), and lightning.
- Made in the USA—This Patton equipment is designed by Patton engineers and built in our Gaithersburg, Maryland facility. Patton's American-made manufacturing process delivers high-quality networking solutions with reliability you can trust.
Line Interfaces (Data) |
- 1 x RJ45 or BNC (Coax)
- Supports 1-4 pairs
|
Ethernet Interfaces |
- 1 x RJ45 Auto-Sensing 10/100Base-TX with full or half-duplex operation
|
LEDs |
- Power, Line, (10 or 100 operation), Eth, and PoE
|
Protocol |
- Transparent to high layer AES67/AVB/TSN Ethernet protocols.
- Supports 802.1Q VLAN tagged frames
- Transparent to IP video schemes
- Fully transparent to compression schemes such as WMV, MPEG-4, and MJPEG
|
?Overvoltage Protection (Line and Ethernet) |
- ?IEC 61000-4-2 (ESD) 25kV (air), 15kV (contact)
- IEC 61000-4-4 (EFT) 40A (5/50ns)
- IEC 61000-4-5 (lightning) 25A (8/20μs)
|
Power Injection (PSE only) |
- DC voltage on Ethernet port
- 54 VDC
|
Power Consumption |
|
Power Supply |
- External AC Adapter 100–240 VAC to 54 VDC
- Input: 30–57 VDC (Recommended 54 VDC)
|
MTBF |
|
Environment |
- Temperature: -10 to 70°C
- Humidity: 10 to 95% (non-condensing)
|
Physical |
- 1.19 W x 4.28 H x 3.36 D in. (30.2 W x 108.7 H x 85.3 D mm)
- 0.78 oz (22 g)
|
Compliance |
- FCC Part 15A, Class B
- CE Mark
- EMC Directive 89/336/EEC
- LVD Directive 73/23/EEC
|
RG-59 Coax Data Reach Estimates |
Description |
10 Mbps |
100 Mbps |
Min. distance |
6 ft
1.83 m |
6 ft
1.83 m |
Max. distance |
4925 ft
1501 m |
1225 ft
373 m |
Min. distance link time |
5 sec |
5 sec |
Max. distance link time |
5–10 sec |
5 sec |
Max. distance PoE class |
Class 2/3 |
Class 4 |
RG-59 Coax Power Delivery Estimates |
PoE Class |
RG-59 |
1
(3.84 W) |
4975 ft
1516 m |
2
(6.49 W) |
4975 ft
1515 m |
3
(12.95 W) |
3925 ft
1196 m |
4
(25.50 W) |
1675 ft
511 m |
Twisted-Pair Data Reach Estimates |
|
10 Mbps |
100 Mbps |
Description |
2 wire |
4 wire |
2 wire |
4 wire |
8 wire |
Min. distance |
6 ft
1.83 m |
131 ft
39.9 m |
6 ft
1.83 m |
6 ft
1.83 m |
6 ft
1.83 m |
Max. distance |
2500 ft
762 m |
3300 ft
1005 m |
915 ft
278.9 m |
1065 ft
324.6 m |
1849 ft
563.6 m |
Min. distance link time |
5 sec |
157 sec |
5 sec |
5 sec |
5 sec |
Max. distance link time |
5–10 sec |
8–265 sec |
5 sec |
6 sec |
6 sec |
Max. distance PoE class |
Class 1 |
Class 2 |
Class 2/3 |
Class 4 |
Class 3/4 |
Twisted-Pair Power Delivery Estimates |
PoE Class |
2 wire |
4 wire |
6 wire |
8 wire |
1
(3.84 W) |
2648 ft
807 m |
5453 ft
1662 m |
8363 ft
2549 m |
11555 ft
3521 m |
2
(6.49 W) |
1587 ft
484 m |
3322 ft
1012 m |
5041 ft
1536 m |
6905 ft
2104 m |
3
(12.95 W) |
794 ft
239 m |
1587 ft
484 m |
2519 ft
768 m |
3453 ft
1052 m |
4
(25.50 W) |
262 ft
80 m |
653 ft
199 m |
1196 ft
365 m |
1587 ft
484 m |
Class 2/3 |
Class 2/3 |
Class 4 |
Class 4 |
Class 4 |
Ordering Information
CL1151E/L/P/BNC/EUI |
CopperLink Industrial Dante and PoE+ Ethernet Extender; Local; BNC; 1 x 10/100; 802.3at; 100-240VAC |
Call for Order |
CL1151E/PAFA/BNC/EUI-2PK |
CopperLink Industrial Dante and PoE+ Ethernet Extender Kit (Local and Remote); BNC; 1 x 10/100; 802.3at; 100-240VAC |
General Availability |
CL1151E/PAFA/TB/EUI-2PK |
CopperLink Industrial Dante and PoE+ Ethernet Extender Kit (Local and Remote); 2 Wire Terminal Block; 1 x 10/100; 802.3at; 100-240VAC |
General Availability |
CL1151E/R/PAFA/BNC/E |
CopperLink Industrial Dante and PoE+ Ethernet Extender; Remote; BNC; 1 x 10/100; 802.3at; PoE Powered |
General Availability |