The Loop-AM3440-E is the latest product in the Loop Access DCS-MUX series that combines various access interfaces and transport over GbE or E1 uplinks. The Loop-AM3440-E supports SAToP/ CESoPSN/ MEF8 Pseudowire Protocols to transport TDM data streams with timing information over packet switched network.
The Loop-AM3440-E provides full non-blocking DS0 cross-connect matrix for up to 28 x E1/T1 + 64 Bundles. Traffic grooming and segregation between the TDM interfaces and the Pseudowires provides flexibility and efficiency, and makes the Loop-AM3440-E an ideal solution for DACS (Digital Access Cross-Connect System) and ADCB (Add/Drop Channel Bank) applications.
With up to 4 STM-1/4/16 (OC-3/12/48) aggregate interfaces on cross-connect modules and 8 STM-1 (OC-3) interfaces on tributaries, Loop-O9500R offers service providers a versatile protection schemes including SNCP(UPSR) and MSP(1+1) protection for both ring and linear network topologies. O9500R can work with Loop-O9100 and Loop-O9400R for SDH/SONET networking.
With hot-pluggable mini size slots design, the Loop-AM3440-E provides access for E1, T1, FOM, FXS, FXO, E&M, Magneto*, C37.94, RS232, X.21, EIA530 and V.35 interfaces. These interfaces are compatible with other Loop products.
- Cross Connect Capability
- Support full non-blocking DS0 cross connect matrix between TDM interfaces and TDMoE Pseudowires
- Suitable for DACS (Digital Access Cross-Connect System) and ADCB (Add/Drop Channel Bank) applications
- Auto A-law/-law conversion
- Ethernet Interface
- 2 x Combo GbE (SFP 100/1000BaseFX and 10/100/1000BaseT)
- IEEE 802.3ad Ethernet Link Aggregation*
- Pseudowires
- Up to 64 concurrent pseudowires
- Encapsulation format
- SAToP
- CESoPSN
- MEF-8 (CESoETH)
- Configurable CoS and VLAN
- Packet Delay Variation Compensation Depth up to 256 ms
- Timing
- System clock source can be chosen from Internal, External or E1/T1 Line with SSM
- Automatic/Manual Clock Recovery modes
- Adaptive Clock Recovery for Pseudowires
- Jitter and Wander conforms to G.823/824 for Traffic Interface
- SyncE
- Management
- RJ45 Ethernet management interface
- SNMPv1/v3, compatible to SNMP-based GUI network management systems and supported by Loop-iNET and Loop-iNMS
- Telnet and SSH v2
- Web GUI Configuration*
- USB console port with VT-100 menu driven interface
- 64K timeslot inband management
- Support Access Control List (ACL)
- Mechanical and Electrical
- 1U height, 19 rack width. ANSI shelf.
- Up to 7 mini-slots for AM3440 series interface modules.
- All plug-in interface modules are hot swappable
- Up to two 48Vdc or 100 ~ 240 Vac hot swappable power modules
- Dual DC or AC power with load sharing
- Temperature range from -20 to 65C
- RoHS compliant
RoHS compliant units are identified by the letter G appearing at the end of ordering code.
| Part Number |
Description |
Notes |
| Loop-AM3440-CHEA-mgmt-G |
1U high Wideband Main Unit with fixed controller, cross-connect and TDMoE unit onboard.
• Supports SAToP (CCPA T1 SAToP*), CESoPSN, and MEF-8
• Up to 64 Pseudowires
• Supports SyncE |
• AM3440-E type chassis with CPU.
• Please order SFP modules separately from SFP optical modules brochure.
• Includes two High Speed Slot Adapters for mini plug-in cards to be used in H1 and H2 slots. |
