The Loop-IP6320A is a high performance Ethernet switch to meet next generation Metro, Data Center and Enterprise Ethernet network requirements designed based on high-end scalable chipset with integration of Layer 2 to Layer 4 packet processing engine, traffic management and fabric interface.
The IP6320A switch provides total 24/48 GbE ports with RJ45 ports. The switch capability of IP6320A supports 120Gbps non-blocking switching for full line speed traffic.
The IP6320A provides advanced L2/L3 features to meet the requirements in Carrier Ethernet and Enterprise network application. IP6320A main features including full IPv4/IPv6 stack, On-chip OAM (802.1ag/CFM/EFM), and Protocol Independent APS (<50ms protect switching).
Capacity
- 8 x 10GbE ports
- 24 */48 GbE ports
- 120 Gbps Wire-Speed Bi-dir Switching Capacity
Carrier Ethernet
- VLAN (IEEE 802.1q)
- Q-in-Q Vlan stacking (IEEE 802.1ad)
- Port-based VLAN (IEEE 802.1q)
- Up to 4K VLAN
- Port Isolation (Private Vlan)
- Jumbo frame up to 9600 bytes
- Ethernet Link OAM – 802.3ah (EFM)
- Ethernet Service OAM – 802.1ag (CFM)/Y.1731
CoS/QoS
- Class-to-Priority Mapping per CoS (802.1p)
- Ingress Policing & Egress Shaping per service
- CIR / PIR (EIR) 2-rate-3-color traffic engineering
- 8 Priority Queues
- Scheduling: Strict Priority, WRR with Hierarchy
- IEEE 802.3x Flow Control
Layer 3
- ARP, Ping, Traceroute
- Static Route
- RIP v1/v2
- OSPF
- IGMP v1/v2/v3
- PIM-SM
Network Protection
- ERPS (G.8032) Ethernet Ring Protection with sub-50ms switching
- ELPS (G.8031) Ethernet Linear Protection
- STP, RSTP, MSTP
- LACP, ECMP *
- VRRP
Management
- SNMP (v1, v2, v3)
- Fully manageable via CLI
- Security
- Configuration upload/download using TFTP
- RMON Performance management
- Syslog, NTP, DNS*
- Port & Vlan Mirror
Power Supply
- DC48: Hot swappable DC48 module for system power, dual for redundancy
- AC: Swappable wide-range AC module *
- DC Mux: Swappable DC Mux module can work with 2 external 12VDC inputs for system power
Miscellaneous
- Harden environment option (-40 ºC to 70 ºC) *
- RoHS compliance
RoHS compliant units are identified by the letter G appearing at the end of ordering code.
| Part Number |
Description |
Notes |
|
|
|
