Loop-C5600 Description
The Loop-C5600 is a high density multi-services shelf designed to accept a mix of Loop series rack cards. These include the Loop-H3308R, Loop-H3304R, Loop-H3304RA, and Loop-O9340R. The C5600 provides one common controller to manage up to 15 plug-in cards and a dual controller* to manage up to 14 plug-in cards.
For 1 controller card C5600 chassis
- 15 single slot H3308R (2/4-pair G.SHDSL.bis)
- 7 dual slot H3308R (8-pair G.SHDSL.bis)
- 14 single slot H3304R
- 14 (2Ethernet + 4E1) and 1 (2Ethernet only) H3304RA
- 7 dual slot O9340R
For dual controller card C5600 chassis*
- 14 single slot H3308R (2/4-pair G.SHDSL.bis)
- 7 dual slot H3308R (8-pair G.SHDSL.bis)
- 14 single slot H3304R
- 14 (2Ethernet + 4E1) H3304RA
- 7 dual slot O9340R
Supports local configuration and diagnostics by using a local or remote terminal
Loop-C5600 Integral Access Shelf supports local configuration and diagnostics by using a local or remote terminal. Users are able to address and identify each rack card’s position and its card type. This enables users to execute in-service diagnostics and fault isolation.
By using SNMP or Telnet connection on the shared controller card of the rack unit, users can remotely control and diagnose Loop rack cards from a centralized location.
- Front and back access (ANSI) unit with optional fan tray and LCD
- Supports dual controller cards*
- Number of plug-in line cards
- Single controller with 15 slots for plug-in line cards
- Each line card is fully independent
- Accepts rack card of type:
- Loop-H3308R Ethernet over Bonded G.SHDSL.bis
- Loop-H3304R High Density G.SHDSL
- Loop-H3304RA High Density G.SHDSL.bis
- Loop-O9340R Multi-Services Gigabit FOM
- Power modules
- Hot-swappable DC plug-in modules(-48 Vdc: -36 to -75 Vdc), dual for redundancy
- Alarm relay
- Log in and password security protection
- Firmware download
- Configuration upload/download
- Management port and interface
- RS232 console port with VT-100 menu
- Two 10/100M fast Ethernet SNMP ports
- SNMP v1 with 5 trap IP
- Telnet with Secure Shell (SSH) protocol
- Access Control List (ACL)
- RoHS compliant
RoHS compliant units are identified by the letter G appearing at the end of ordering code.
Part Number |
Description |
Notes |
|
|
|