The IP6510-LN Multiple WAN Edge Router has IPv4/IPv6 dual stack functionality and Level 3 Routing in a single unified device. It is suitable for large deployments that require only moderate bandwidth and a small port density but a very competitive CapEx. The LN stands for Linux, which backs up the Loop-OS architecture inside the IP6510-LN. The new Loop-OS includes many advanced features with more functionality to help you improve your network.
These features inside the Loop-OS include IPv4/IPv6 dual stack routing capability, software bridging*, serial-to-IP/UDP terminal services*, and network security features. With RIPng, OSPFv3 and BGP-4, the IP6510-LN is able to build a reliable IPv6 routed network.
All WAN ports and LAN ports can be configured into bridge mode*, router mode, or combinations of both. WAN interfaces including Ethernet, E1/T1 and Serial RS232/RS485 provide flexibility for any access network.
Using VPN connectivity over IPSec included in the Loop-OS software suite allows a highly secure and reliable connection over an IP-based network to any location.
Mechanical and Electrical
- 2 Tributary Slots for WAN interfaces
- Power Module
- AC and DC coexist
- AC power: 100 to 240 Vac, 0.8 A
- DC power: -36 to -72 Vdc, 1.2 A
- Commercial unit: 0°C to 50°C;Industrial unit: -20°C to 70°C
WAN Interface
- Tributary Slots
- 2 ports
- Cold-swappable
- Plug-in card types:
- E1 card: 2 ports per card, Nx64k
- T1 card: 2 ports per card, Nx64k
- Ethernet card: 1 port per card,electrical RJ45
- Ethernet card: 1 port per card,optical SFP
- Built-in 2 Ethernet ports
- Multiple WANs per fractional E1/T1 interface is supported, up to 64 WAN per system (maximum 16 WAN supports PPP encapsulation)
LAN Interface
All Ethernet Interfaces
- 10/100BaseT
- Speed and duplex-mode auto-negotiation
Layer 3
- IPv4/IPv6 dual stack
- Routing Protocols: Static Route, RIPv1/v2, RIPng,
- OSPFv2/v3, BGP4.
- Multicast protocols: IGMPv1/v2/v3
- VLAN Routing based on Static Route, RIPv1/v2,
- RIPng, OSPFv2/v3.
- Address Translation
- NAT
- Port Forwarding Table for NAPT (Virtual Service)
- IP-VPN connectivity over IPSec
Security
- IPSec
- Encryption: DES, 3-DES, AES-128/AES-256
- Authentication: MD5, SHA-1
- Key Management
- IKEv1/v2 (pre-shared key or RSA certificate)
- Up to 64 concurrent tunnels per interface
- IP-VPN connectivity over IPSec
- Access Control
- Packet-Filtering based on policy type:
- Inbound/Outbound direction
- Source/Destination IP Address Range
- Any Protocol Types (ICMP, TCP, UDP, etc.)
- TCP/UDP Port Number Range
- 1 control list per interface
- Up to 100 rules per control list
- 802.1x port-based authentication*
- Multilevel login privilege control
- Radius Client is supported, up to 3 Radius servers available for addressing.
- SSHv1/v2
- SNMPv3
- Auto MDI/MDI-X cross-over
Layer 2 Encapsulation Protocols
- PPP, MLPPP, Cisco HDLC, raw HDLC
Management
- Telnet and SSHv1/v2 (up to 4 concurrent sessions)
- SNMPv3
- Multilevel login privilege control
- Syslog
- NTP Client for IPv4, up to 4 NTP server
QoS
- Policy based Egress Rate Limiting
- Traffic Classification based on
- Outbound direction
- IPv4 or IPv6
- Source/Destination IP Address Range
- TCP/UDP Port Number
- (DSCP+ENC) 1byte field / ToS 1 byte field
- Any Protocol Type
DHCP
- DHCP Server/Relay for IPv4/IPv6
- BOOTP compatible for IPv4
Software Bridging*
- Frame size up to 1916 bytes*
- IEEE 802.2x Flow Control*
- STP(802.1d) *, RSTP(802.1w) *, MSTP(802.1s) *
- Up to 16K MAC Table*
- User-configurable MAC aging time*
- Ethernet FCS padding/unpadding*
- 802.1x port-based authentication*
- VLAN*
- Support up to 4094 VLANs*
- VLAN ID mapping*
- Support Q-in-Q *
- Support VLAN Routing
RoHS compliant units are identified by the letter G appearing at the end of ordering code.
| Part Number |
Description |
Notes |
|
|
|
