The Data Connect Fiber-E is a fiber media E1 extender for G.703 E1 transmission. The BNC model provides unbalanced 75 Ohm coaxial connections while the RJ-45 model provides balanced 120 Ohm connections over twisted pair wiring. When the DCE/Fiber-E card is placed in the DCE/Fiber-E-SA-Kit management, the card status, type, version, fiber link status, E1 or T1 link status and alarms can all be displayed. Configuration is also available to enable or disable the port, reset the port, do far end fault setting, and initiate local or far end loop-back tests.
Features
- Network Management via Terminal or SNMP in FRM301Chassis
- T1/E1 RJ-45 (USOC RJ-48C) or Coax (BNC) to fiber converter
- Support AMI or B8ZS/HDB3 line codes
- Unframed (Transparent clear channel)
- User selectable line code setting, Far End Fault (FEF) Setting, Loop back test
Specifications
| Standard |
E1: ITU-T G.703, G.704, G.706, G.732,
G.823; T1: ITU-T G.703, G.704, AT&T
TR-62411, ANSI T1.403
|
| LEDs |
PWR, Fiber Link, Line (E1 or T1) Link,Test mode |
| Power |
DCE/Fiber-T/E-LP External AC Adapter
9VDC@ 1A
DCE/Fiber-T/E-UI: AC Model: 100 — 240 VAC
± 10%;
Frequency: 50 — 60 Hz
DC Model: 24 — 72 VDC ±10%
|
| Environment |
Temperature: 0 — 50°C (Operating)
0 — 70°C (Storage)
Humidity:20 — 80% non condensing (Operating)
10 — 90% (Storage)
|
| Power Consumption |
DCE/Fiber-T/E-LP: < 5W
DCE/Fiber-T/E-UI: <2W
|
| Dimensions(WxDxH) |
DCE/Fiber-T/E-LP 85.6mm x 122.6mm x20mm
DCE/Fiber-T/E-UI: 85.6mm x 191.7mm x30mm
|
| Weight |
DCE/Fiber-T/E-LP: 300g
DCE/Fiber-T/E-UI AC model: 500g,
DC model: 550g
|
| Compliance |
CE, FCC Class A |
| MTBF |
65000 Hours |
Application
Ordering Information
DCE/Fiber-TIE
Product Type |
|
XX-
Connector Type |
XXX-
Connectivity Distance |
| DCE/Fiber-E-2PK |
|
ST |
002: 2km |
