The Enable-IT 865XSC Gigabit Coax PoE Extender is the fastest encrypted and Secure Ethernet Extender on the planet bar none!
Designed & Made in the USA with quality and pride. These American-made Enable-IT 865XSC Gigabit Coax PoE Extender uses industry Coaxial standard 75 Ohm BNC connectors to make installing in most any environment very easy. We have engineered most of the technical complexity into automatic line adjustments so the plug and go simplicity on your existing or new wiring is a snap.
Ethernet Extension Experts designs and manufactures the Enable-IT 865XSC Gigabit Coax PoE Extender kit, along with its entire product line, in the USA that makes us more responsive to customer needs . We take great pride in using the highest quality materials and actual craftsmanship when building our products. We even can customize these at time of order to fit your specific needs as we manufacture in our very own US West coast facilities.
This is trusted Business Reliable Professional Grade PoE Extension without the high cost of fiber or unsecured wireless. Why risk your business to lower quality imported equipment? The value of your network communications should be a protected investment. Beware of Cheap Chinese “so called Business Use” (not even suitable US Home use) gear that is banned in the US due to proven hidden spyware.
The Enable-IT 865XSC PRO Gigabit Coax kit uses 75 Ohm coaxial wiring for best performance.
The 865XSC PRO Gigabit Coax PoE Extender can support up to 9 865XC CPE units on the same coax wire, and actually can run on just 1 physical wire!
Keep in mind that all DC including (PoE) voltage drops over distance and thicker gauge wire will help this issue. As a rule of thumb you will lose up to 6V per every 200 feet of wiring, depending on the gauge. For example in Category 5 or 6 24 AWG there is less wire/copper to conduct electricity which is lower power strength at distance due to impedance. Lower power strength increases the amperage and that generates more heat in the wire. Depending on distance, you may need to use more pairs or wire or 18 gauge wiring as a dedicated DC power buss – like low voltage landscape wire and run Ethernet on a 1-pair 24 AWG. There are options to maximize your distance and PoE output when used in conjunction with our PoE Extenders or PoE DSLAM that can power a 56V 60W PoE IP PTZ Camera at 3,000 ft away.
| * Extended Gigabit Coax PoE throughput over new or existing 75 Ohm coaxial wiring up to a maximum distance of 3,000ft / 915m encrypted and secure.
* Can be daisy chained to extend infinitely in linear or tree topology.
* Rapid LAN style installation RJ45 jacks and Coax BNC connectors – no programming required.
* Supports up to 9 Enable-IT 865XSC PRO CPE units on the same coaxial wire for the entire length of the run – ideal for multidrop off of a single Enable-IT 865XC PRO Gigabit Coax PoE Extender kit.
|
* Ruggedized Professional Business Grade mountable casing for harsh environments.
* LAN Device independence – Transparent to 802.3 Protocols, Applications and MAC / IP addresses.
* Longest warranty protection included exceeding any knockoff competitors.
* Quad Gigabit LAN RJ-45 switch on the remote end.
1-port model available as the 865XC PRO.
|
This kit includes the following:
(1) EnableIT 865XC PRO Gigabit Coax PoE Extender CO unit
(1) EnableIT 865XSC PRO Gigabit Coax PoE Extender CPE unit
(2) 10′ Black RJ-45 Ethernet Patch Cords
(1) 56VDC – 2.5A 60W Gigabit PoE Injector with Country Specific (120-260V AC) Power cord.
(1) Enable-IT 865XSC PRO Quickstart Guide |
Power
56VDC – 2.5A 60W Gigabit PoE Injector with Country Specific (120-260V AC) Power cord.
Data Rate
1,000Mbps full-duplex Ethernet Data
1,000Mbps Interconnect throughput – Maximum*
Ethernet LAN Protocol Independent
Ethernet LAN MTU 1500
IP VLAN passthough
Interface
Ethernet: (1) LAN RJ-45 Standard 10/100/1000 Base-TX autosensing ports
Interlink: 75 Ohm BNC (1-Pair)
|
865XC PRO CO Dimensions
Height 1″ (26mm) Depth 2.75″ (70mm) Width 4.37″ (111mm)
865XSC PRO CPE Dimensions
Height 1.4″ (35mm) Depth 3.4″ (86mm) Width 4.4″ (111mm)
Environment
Operational Temperature: -49°F to 168°F (-45°to 76°C)
Humidity: 5% to 95%, non-condensing
Enclosure
Ruggedized wallmount black Aluminum casing Optimized for heat extraction and isolation without fans.
|
*Actual data rates can vary as there are uncontrolled characteristics for every install:
1) Gigabit Ethernet Chip manufacture specs in the end device LAN equipment. Can be different on each end.
Check your OS Ethernet LAN packet size settings, i,e Jumbo Frame, etc.
2) Amount of dedicated LAN chip buffer memory in the end device LAN equipment.
3) Traffic types and protocols. i.e. VoIP prioritized over other packets, VLAN’s, etc.
4) Interlink wire gauge.
5) Interlink wire type for number of twists per spec on Category rated. i.e. CAT3 can only handle 80Mbps
6) Interlink wire pair used – same twisted pair bundle or mixed pairs.
7) Length of Interlink wiring. The 860XSC PRO dynamically adjusts to changing conditions to select fastest and stable channels on the wire pair.
8) Electro magnetic interference from surrounding environment. Hospital X-Ray rooms bleeding out EMF, other high frequency signaling bleeding into Interlink wire pair, Microwave WiFi communications blasting EMF radiation onto the Interlink wire pair run, etc. |
ORDERING INFORMATION
| Model # |
Description |
Availability |
| 865XSC PRO |
Enable-IT 865XSC PRO 4-Port Coax Gigabit PoE Extender Kit |
General Availability |
|
|
