The Enable-IT 865QW PRO Ultra PoE Extender is the world’s only available solution to Extended Ethernet and Ultra High Power PoE in a complete solution that exceeds the IEEE distance limitations for all Ethernet equipment and 802.3af/at/bt Power Over Ethernet (PoE) Standards. The 865QW PRO enables the simple installation of a high powered PoE devices like Axis Q or other high power IP Cameras, Aruba and Cisco Access points up to 3,000ft (915m) from your LAN and Power Source. This is ideal for installing any PoE IP Security cameras or PoE WiFi Access Points.
This Ultra PoE Extender drives the reach of Ultra high power PoE and Ethernet to more than (9) nine times the typical Ethernet distance limit of 328ft, up to 3,000ft (915m) distance. There is no substitute for our Expertise – Only Enable-IT 865QW solution can. Made in the USA with quality and pride – the only manufacturer to do so in this industry.
To increase the durability and extended use of the product providing maximum future technology protection, 865Q PRO Ultra PoE Extender have been designed to meet the challenge of modern switched LANs and allows you to add features and capacity as your network expands. The 865QW PRO Ultra PoE Extender Solution delivers full duplex Gigabit Ethernet up to 1.2GB/s throughput.
* Extended Ultra Power over Ethernet (PoE ) over RJ-45 Twisted Pair.
* IEEE 802.3 Ultra PoE is delivered:
on pins 3/4/5/6 – positive power
on pins 1/2/7/8 – negative power
* Optimized for Ultra PoE ++ devices like the Axis Q Series PTZ cameras.
* Using a managed PoE Switch for data input will detect existing power and shutdown
Use our 828 PoE Unit to solve this issue or use standard IEEE 802.3 data only switch |
* Industrial Grade DIN Rail or Wall mountable casing for harsh environments.
* LAN Device independence – Transparent to 802.3 Protocols
Applications and MAC / IP addresses.
* Longest warranty protection included exceeding any knockoff competitors.
* 150W Ultra PoE power and Gigabit LAN ports to drive the most
demanding PoE Devices at distance. |
This kit includes the following:
(1) 865Q PRO CO Ethernet Extender
(1) 865QW PRO CPE Self Powered Ethernet Extender in a Outdoor IP68 Rated enclosure
(3) W Case Cable Seal Connectors
(1) W Case Cable Seal Cap
(1) 56V – 150W PoE Injector Power Adapter
(1) Country Specific (120-260V AC) Power Cord
(2) Ethernet Patch cords
(1) Enable-IT 865QW PRO QuickStart User Guide
(1) Lifetime Manufacturer Warranty |
Power
CO unit
– 56V – 150W DC Injector – country specific AC Input (120-260VAC)
– Using a managed PoE Switch for data input will detect existing power and shutdown
Use our 828 PoE Unit to solve this issue or use standard IEEE 802.3 data only switch
CPE unit
– remote self powered uses 500mA and passes remaining PoE budget to end PoE device
Data Rate
600Mbps full-duplex Gigabit Ethernet Data
Interface
Ethernet: (1) LAN RJ-45 Standard 10/100/1000 Base-TX autosensing ports
Interlink: RJ-45 (2-Pair min, 4-pair best for distance)
Optimal power at distance, use 4-pair Cat5e or better wiring.
|
Dimensions
CO Unit:
Height 1.25″ (32mm) Depth 3.45″ (88 mm) Width 5.3″ (135mm))
CPE Unit:
Height 2.5″ (89mm) Depth 4.7″ (119mm) Width 8.5″ (216mm)
Environment
Operational Temperature: -49°F to 168°F (-45°to 76°C)
Humidity: 5% to 95%, non-condensing
Enclosure
IP30 Rated Slim Metal casing with DIN Rail or wall mount options
Interlink configuration
RJ-45 Interface – Data is pin 1 & 2
+ Power is 3, 4 and 5
– Power is 6, 7 and 8
|
ORDERING INFORMATION
| Model # |
Description |
Availability |
| 865QW PRO |
Enable-IT 865QW PRO 1-Port 600Mbps Outdoor Coax Gigabit PoE Extender Kit |
General Availability |
|
|
