DATA CONNECT IG56-HV V.92 56KBPS STANDALONE DIAL MODEM HIGH VOLTAGES
RUGGEDIZED MODEMS
The Data Connect DCE/IG56 high-speed V.92 dial-line modem are designed and manufactured for rugged industrial applications over the Public Switched Telephone Network (PSTN). The DCE IG56 utilizes the industries latest V.92 modem technology to deliver outstanding features, performance, and reliability in one cost-effective solution.
The DCE IG56 modems are ideally suited for industrial communication applications including SCADA systems, RT’s, traffic monitor and control, and industrial automation networks. The DCE IG56 supports RTU’s equipped with an EIA RS-232 or RS-485 serial port. Data communications speeds up to 56Kbps are supported.
The modem incorporates the latest data compression and error-correction standards for improved data transmission and reception over marginal and poor-quality telephone lines.
The DCE IG56 modems are powered by a wide range of AC and DC power supply voltages. Its power consumption and low stand-by current technology design makes the DCE IG56 ideal for battery-powered system as well as regular ac powered operation.
FEATURES
Worldwide Operation Support:
-ITU-T V.92/V.34BIS/V.34/V.32BIS/
-V.32/V.22bis/V.22 /V.23/V.23/V.21
-V29 FastPOS
-V.22bis fast connection
Data Compression:
-V.44/V42bis/MNP 2
Error Correction:
-V.42/MNP 2/MNP 4
DTE/ Host Interface
EIA RS-232 and RS-485
Embedded AT command set
Sixty-three embedded and upgradeable
Country profiles for worldwide homologation
NVRAM fro configuration and country profile storage
Built-in diagnostic and configuration management
Heavy-duty surge protection provided at power supply and
Phone line interface
Supports wide range of AC and DC power supply options
Supports DC power supplied from DTE or DB-9 connector
Wide range of operating temperatures
Optional mounting kits for DIN Rail mounting or wall mount
SPECIFICATION
Data Rate Support
Data modem:
ITU-T V.92: Up to 56Kbps
V.34bis: Up to 36600 bps
V.32bis/V.32 Up to 14400 bps
V.22bis: Up to 2400 bps
V.21: 0-300 bps
Bell 212A: 1200 bps
Bell 103: 0-300 bps
Fax modem:
Send and receive fax up to 14.4 kbps
V17, V29, V27ter, V21 channel 2
EIA/TIA 578 Class 1, T.31 Class 1.0, and Class 2
Data Format:
Asynchronous, 7, 8, or 9 data bits, parity, 10- or 11-bit character with 1 or 2 stop bits
Modulation
Fully compatible with ITU-T V.92/V.34/V.32bis/V.22bis/V.21 Bell 212A and Bell103 compatible modes
Transmission Line Interface
2-wire full-duplex over PSTN
Connector: RJ-11C
DTE/RTU Interface
The modem provides serial ports to support RS-232 or RS-485
(Selectable) interface standards:
RS-232 Interface
Connector: DB9-F
Signals: RTS, CTS, CD, TD, RD, DTR, DSR, RI
RS-485 Interface
Connector: RJ-11C
Signals: 4-wire full duplex or 2-wire half duplex
TX+, TX-, RX+, RX-
Front Panel Indicators
LED: Indicators:
DTR, TXD, RXD, DCD, DSR, RI
Power supply
Three models support various power options:
Standalone: 90-264 VAC
Standalone: 100-400VDC
Standalone: 10-48VDC
Power consumption:
Idle mode: 65 mA@12V, 0.78 watts
Normal mode: 75 mA@12V, 0.9 watts, typical
Mechanical
Enclosure dimensions:
4.1” (W) x 5.0” (L) x 1.3” (H)
104mm (W) x 127mm (L) x 33mm (H)
Weight: 0.5 pound, without AC power module
Environment
Temperature:
Operation: -40?C to +85?C
Storage: -40?C to +85?C
Humidity:
Up to 95% non-condensing
Dry Contact Detection (optional)
Two optical isolated dry contact detection are provided for two external devices (consult factory for additional information).
ORDERING INFORMATION
DCE/IG56
Standalone with AC power module, 90-264VAC
DCE/IG56DC
Standalone, DC power, 10-48VDC
DCE/IG56-HV
Standalone with AC power module, 90-264VAC or 100-400VDC
DCE/IG202T-DIN
DCE EN2 Din Rail Kit
