1.2, 2.4, 9.6 & 14.4, 28.8 kbps
- Bell 202T, V.22bis, V.32bis
- Dial-Up and Leased Lines
- Powered from 5-24VDC through the Data Port
or an External Jack
- Automatic Power Down when inactive
- -40 degrees C to +85 degrees C Operating Temp.
- Hayes AT Compatible
- Ideal for Meters, Relays, RTUs, Controllers, etc.

MIU/PowerPort can be powered by delivering +5VDC (regulated) through pin 10 of the DB25. An optional 7-16VDC version is also available. Alternatively, an external jack allows the MIU/PowerPort to be powered from a wall transformer or other low voltage AC or DC power source. When not on line, the dial-up MIU/PowerPort modems automatically go into a power down mode and consume only a few microamps while inactive. The MIU/PowerPort operates over dial and 2-wire/4-wire leased lines at full or half duplex as appropriate with various
modulations, including:
- Bell 202T (1200bps)
- V.22bis (2400bps)
- V.32bis (14400bps)

The MUI/PowerPort is fully Hayes AT command set compatible with programmable S-registers.
All models will operate in temperatures from -40 degrees C to +85 degrees C and are surge protected on the analog line up to 5kV.